jd 970 4x4 fel bh
beagleman
Join Date: Sep 2003 Posts: 6 macon, nc |
2004-01-26 75121
hi guys need some help,
just replaced fuel line, had to take all sheet metal out in
console area, i put it back together, now juice isnt getting to the starter. fuses are good, pto's are disengaged
and switch under seat is pluged in. any suggestions
Reply to | Quote Reply | Add Photo
jd 970 4x4 fel bh
Chief
Join Date: Jul 2003 Posts: 4297 Southwest MiddleTennessee Pics |
2004-01-26 75131
The seat switch may be hooked up but may not be actuating properly. This happened on my 4410 and I had to clean the switch and an exercise it to loosen it up and make it function properly. ....
Reply to | Quote Reply | Add Photo
jd 970 4x4 fel bh
jdgreen
Join Date: Jul 2003 Posts: 232 Maryland |
2004-01-26 75141
Is everything else working electrically? Lights? Dash Lights? If not , then I would check the fusible link at the starter. See if it plugged together securely. also check wires on back of key switch to see if any came loose. If you do have lights, you still could have a loose wire on back of switch or a loose wire on a safety switch. the neutral switch is at the bottom of the dash in front of gearshift lever. Good luck. ....
Reply to | Quote Reply | Add Photo
jd 970 4x4 fel bh
beagleman
Join Date: Sep 2003 Posts: 6 macon, nc |
2004-02-01 75706
thanxs ....
Reply to | Quote Reply | Add Photo
jd 970 4x4 fel bh
beagleman
Join Date: Sep 2003 Posts: 6 macon, nc |
2004-02-01 75707
thanx ....
Reply to | Quote Reply | Add Photo
Go Top
Share This